Luthra Pneumsys
Vasai East, Mumbai, Maharashtra
GST No. 27AAAFL3685N1ZT
TrustSEAL Verified
Call 0804860353755% Response Rate
SEND EMAIL
Gem Equipment’s which specialize in design, engineering and fabrication of Cooling Towers, Air Dryers, Industrial Chillers and Compressed Air Treatment Accessories.
We manufacture cooling towers in various designs such as Square Cooling Tower, bottle Cooling Tower, Cross Flow Cooling Tower, Evaporative Cooling Tower, Modular Cooling Tower, Double Cross Flow and Dry Type Cooling Tower to suit multiple applications. Our Air Dryers also come in different variants to improve the quality of compressed air dryers effectively. The different types are compressed Air Dryers, Wall Mounted Air Dryers, High Pressure Air Dryers, SPD series Air Dryers, Heatless Desiccant and Next gen Air Dryers.
Product Details:
| Usage/Application | Industrial |
| Shape | Square |
| Tower Material | Metal |
| Supply Phase | Single Phase |
| Color | Blue |
The tower casing is corrosion-free and lightweight.
Product Details:
| Usage/Application | Industrial |
| Cooling Capacity | 5.0 MW |
| Brand | GEM |
| Capacity | 1.0 MW |
| Shape | Square |
| Tower Material | Metal |
| Color | White |
The main function of the offered dry cooling tower is to cool and maintain the temperature of process hot water at a particular level. The tower works on a principle of heat transfer and is driven by an electric motor. The wound copper tubes eliminate any unnecessary leakage after installation. The tubes also allow better heat transfer efficiency.
The positive and controlled expansion between the tube and fin provides a clean, smooth inner tube surface for water pressure drop and guarantees uniform heat transfer. The rigid galvanized steel frame provides protection against tube damage during expansion and installation. Also, it is mounted on a heavy duty channel base frame. The axial flow fans are noise-free. The low speed of the motor minimises noise and increases efficiency. Motors are specially designed to withstand moisture, rain and dust.
SALIENT FEATURES:
Product Details:
| Usage/Application | Industrial |
| Brand | GEM |
| Shape | Square |
| Tower Material | Metal |
| Supply Phase | Single Phase |
| Color | Blue |
The tower casing is corrosion-free and lightweight.
The GEM COOLING TOWERS is a pioneering product in Design & manufacture of FRP Cooling towers in South India. We are continuously striving to offer better Cooling solutions to customers, which are both, innovative and also state of the art.
ECT is the Evaporative Coil Cooling tower which is an induced draft counter flow design Closed Circuit Cooler.
SALIENT FEATURES:Heat from the Process Fluid is circulated through the coil of the closed circuit cooler gets dissipated through the coil tubes to the water cascading downward over the tubes. Simultaneously, air is drawn from air inlet louvers from the base of the cooler and travels upward over the coil. A small portion of the water gets evaporated and the warm moist air is discharged to the atmosphere which removes the heat from the process fluid.
FUNCTIONS & FEATURES:STRUCTURE:Frame All supporting structures are hot-dip galvanized steel to minimize rusting and corrosion ensuring long life.
Casing Made of Fiberglass Reinforced Polyester (FRP), it is lightweight, easy to assemble, no painting required and thus reducing maintenance cost.
Inspection doors are furnished to provide convenient access to the interior for inspection, maintenance, adjustment of float valve, cleaning of lift-out strainer and flushing out the sump.
AIR DISTRIBUTION:Motor The fan motors are totally enclosed weather proof type. The motors are mounted on easily adjustable base located inside the fan stack ensuring lower noise level. Fan Specially designed energy efficient fans are of induced-draft axial type with adjustable pitch. Materials chosen are non corrosive of plastic, FRP or aluminium alloy. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is factory set and dynamically balanced.
Product Details:
| Usage/Application | Industrial |
| Brand | GEM |
| Shape | Square |
| Tower Material | Metal |
| Supply Phase | Single Phase |
| Color | Blue |
The tower casing is corrosion-free and lightweight.
SALIENT FEATURES:Evaporative (FRP) Cooling towers are of vertical induced draft counterflow design with uniform water distribution and optimal heat transfer. Towers can be installed independent of wind direction.
CASING:The tower casing is made of tough fiberglass reinforced plastic (FRP) and has sufficient structural strength to withstand high wind velocities and vibrations. UV - stabilized resin is used along with gel coat for longer life. It is resistant to local impacts and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof & avoids water spillage.
FILL:The fill is of rigid Poly Vinyl Chloride (PVC) and is of honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without any cutting for curves. The air pressure drop through the fill is negligible. The fills are available with flute height of 6mm, 12mm, and 19mm with sheet thickness of 1mm and 1.2mm.
Product Details:
| Usage/Application | Industrial |
| Brand | GEM |
| Shape | Round |
| Tower Material | Metal |
| Supply Phase | Single Phase |
| Color | Blue |
The tower casing is corrosion-free and lightweight.
SALIENT FEATURES:Evaporative (FRP) Cooling towers are of vertical induced draft counter flow design with uniform water distribution and optimal heat transfer. Towers can be installed independent of wind direction. The tower casing is made from tough fiberglass and has sufficient strength to withstand high velocities and vibrations. The water collection sump is leak proof and avoids water spillage.
The performance of cooling tower greatly depends upon the water distribution over the fills. SCSP nozzles distribute water evenly through a wide spray angle without any dry pockets. The fill is of rigid Poly Vinyl Chloride (PVC) and is of honeycomb design with very large contact surface area.
CASING:The tower casing is made of tough fiberglass reinforced plastic (FRP) and has sufficient structural strength to withstand high wind velocities and vibrations. UV - stabilized resin is used along with gel coat for longer life. It is resistant to local impacts and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof & avoids water spillage.
FILL:The fill is of rigid Poly Vinyl Chloride (PVC) and is of honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without any cutting for curves. The air pressure drop through the fill is negligible. The fills are available with flute height of 6mm, 12mm, and 19mm with sheet thickness of 1mm and 1.2mm.
SPRINKLER:Automatic rotary sprinkler system made of Nylon 66 material, with rotary head and sprinkler pipe distributes the hot water over the entire space of the filler. Sprinkler pipes are non-clogging, require low pressure to operate and assures uniform water flow with minimal operating pump head. The FRP eliminators attached to sprinkler pipe are specifically designed for low pressure drop and minimises the drift loss of water.
DRIFT ELIMINATOR:Reduces carry over losses of water. The eliminator is of rigid PVC (Applicable for square type cooling tower). The individual drift eliminators of S-shaped corrugated sheets are bonded with subsequent layers to create the structure. The entire area is thus divided into several fine S shaped mini zones each removing water droplets on the entire surface of the cell.
AXIAL FAN:Specially designed energy efficient fans are of induced-draft axial type with adjustable pitch. Material chosen are non corrosive of plastic, FRP or aluminium alloy. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is factory set and dynamically balanced.
MOTORS:The motors are totally enclosed (IP55), flange type, 415 V, 3 ph, 50 Hz, induction weather proof with SS304 extended shaft and are specially designed for cooling tower application.
CORROSION FREE:The tower casing is of FRP, fill and eliminator are of PVC, and SS304 fasteners are used, thus eliminating corrosion, the biggest enemy of cooling tower. All steel components such as motor support, water distribution pipes, hardware etc., are hot dip or spray galvanized.
LIGHTWEIGHT:The towers are compact and light weight resulting in easy delivery to site and installation. Light weight also saves on structural and masonry. Roof installation can also be done without any special reinforcements.
Product Details:
| Usage/Application | Industrial |
| Brand | GEM |
| Shape | Square |
| Tower Material | Metal |
| Supply Phase | Single Phase |
| Color | Blue |
Sufficient strength to withstand high velocities and vibrations
Evaporative (FRP) Cooling towers are of vertical induced draft counterflow design with uniform water distribution and optimal heat transfer. Towers can be installed independent of wind direction.
CASING:The tower casing is made of tough fibreglass reinforced plastic (FRP) and has sufficient structural strength to withstand high wind velocities and vibrations. UV - stabilised resin is used along with gel coat for longer life. It is resistant to local impacts and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof & avoids water spillage.
FILL:The fill is of rigid Poly Vinyl Chloride (PVC) and is of honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without any cutting for curves. The air pressure drop through the fill is negligible. The fills are available with flute height of 6mm, 12mm, and 19mm with sheet thickness of 1mm and 1.2mm.
Product Details:
| Usage/Application | Industrial |
| Brand | GEM |
| Shape | Square |
| Tower Material | Metal |
| Supply Phase | Single Phase |
| Color | Blue |
The tower casing is corrosion-free and lightweight.
The GEM COOLING TOWERS is a pioneering product in Design & manufacture of FRP Cooling towers. We are continuously striving to offer better Cooling solutions to customers, which are both, innovative and also state of the art.
ECT is the Evaporative Coil Cooling tower which is an induced draft counter flow design Closed Circuit Cooler.
PRINCIPLE OF OPERATION:Heat from the Process Fluid is circulated through the coil of the closed circuit cooler gets dissipated through the coil tubes to the water cascading downward over the tubes. Simultaneously, air is drawn from air inlet louvers from the base of the cooler and travels upward over the coil. A small portion of the water gets evaporated and the warm moist air is discharged to the atmosphere which removes the heat from the process fluid.
FUNCTIONS & FEATURES:STRUCTURE:Frame All supporting structures are hot-dip galvanized steel to minimize rusting and corrosion ensuring long life.
Casing Made of Fiberglass Reinforced Polyester (FRP), it is lightweight, easy to assemble, no painting required and thus reducing maintenance cost.
Inspection doors are furnished to provide convenient access to the interior for inspection, maintenance, adjustment of float valve, cleaning of lift-out strainer and flushing out the sump.